M-Powers’s MPF-30 is the ultimate spray foam system for contractors. With increased voltage compared to our MPF-20, you get more power, better function in the cold, and a quick heat time. Get to work faster and enjoy a portable machine that can fit through any door. At 240 pounds and a width of less than 24 inches, it’s all about efficiency. Thanks to our proprietary air injection system, the M-Power spray foam system is able to create turbulence with less air, and a smaller compressor, than our competition.
Ditch the transfer pump, and say goodbye to being at the mercy of a rig, and the stress it puts on your wallet. With the most powerful, portable, and cost effective spray foam machine on the market, you are in complete control. Don’t settle for shoddy work, choose your capacity based on the jobs need and maintain a proper 1 to 1 ratio with our variable rate control.
What about maintenance?
With the M-Power’s self cleaning spray foam gun, it’s as easy as spraying pressurized acetone through the passageways, and you’re done. With heavy use, wear and tear can be expected, but what you won’t run into is a large fee for repair. Our components use generic sources to keep costs down and allow a quick run to your local part shop. This gets you out in the field faster!
We know the MPF-30 is the best spray foam system for contractors and we stand by our product. When you purchase the machine you’ll receive hands-on training in the field as well as access to maintenance and trouble-shooting questions. All machines come with a 1 year warranty.
Quick Specs :
- Output Flow Rate: 2.0 GPM
- Max Pressure: 400PSI
- Power Requirement: 1×30 Amp 220v
- Heater Power: 3800 watt
- Size/Weight: 23.5” W x 30.5” D x 41” H / 240lb + Hose
- Multi Foam Use: Use polyurethane injection foam, or polyurea (with polyurea gun attachment)
Read the Full Specs
Don’t need all the power? Shop the MPF-20
Frank Fletcher needed the ability to spray both polyurea coatings and injection foam in his business. Previous to purchasing the M-Power Spray System, Frank was using a handheld cartridge gun which could apply the product well but was time consuming, especially on large volumes.
With the M-Power system and the ability to precisely fine-tune in ratios, he found he could flow a lot more material. Setup was simple and once the ratios were dialed in, the heat stayed constant producing a consistent product. The self-cleaning feature of the gun was a real time and cost saver as he didn’t have to constantly change the tip.
“The customer service is great. Tom really knows the machine and is always ready and able to quickly respond to questions and provide solutions.” —Frank Fletcher